Type | Oil cooler |
---|---|
Application | General industrial machine and other uses. Ideal for when there is a lot of dirt on the shell side (oil side). |
Features |
・Original φ12.7 low fin tube enables high performance and downsizing. ・Choose from 3 model types for all sizes for large and small oil flow rates. ・High flexbility of installation by selectable flow direction and adjustable U-bolt stand. ・Cleaning and replacement of tube bundle are available with floating tube sheet type. |
⇈ You can select heat exchanger simply by the catalog.
Item | Standard Spec. | Option |
---|---|---|
Type | Floating tube sheet | |
Maximum working pressure | Shell side: 1.0MPa Tube side: 1.0MPa |
|
Corresponding fluid | Shell side: Mineral oil Tube side: Freshwater |
Shell side: Water glycol oil, fatty ester oil, phosphate ester oil, etc. |
Cooling tube | Specifications: φ12.7 low- finned Material quality: Phosphorus deoxidized copper |
|
Heat transfer area | 9-33㎡ | |
Tie-in | Shell side: Rc threaded type Tube side: Rc threaded type |
Able to choose flanged type |
Code | Fluid type |
- | Mineral oil |
G | Water glycol oil |
Fatty ester oil | |
F | Phosphate ester oil |
W | G+F |
Code | Heat transfer area (㎡) | Shell dia. |
518 | 9 |
φ216.3 (200A) |
522 | 11 | |
526 | 13 | |
531 | 15.5 | |
535 | 17.5 | |
540 | 20 | |
544 | 22 | |
549 | 24.5 | |
554 | 27 | |
634 | 17 |
φ267.4 (250A) |
644 | 22 | |
652 | 26 | |
652 |
29 | |
666 | 33 |
Code | Oil quantity classification *1 |
0 | Large |
1 | Normal |
2 | Small |
Code | Tie-in |
B |
Tube side: threaded Shell side: flanged *Only for FPD-5XX |
C |
Tube side: flanged Shell side: flanged *For FPD-5XX, FPD-6XX |
Oil quantity classification
*1 Flow rate classification is basically as follows.
・large oil rate is model with small number
・small oil rate is model with large number
Model example:G-FPD-658-0-C
+81-3-6912-9922+81-3-6912-9922
Excluding Saturdays, Sundays and Holidays