Type | Heat exchanger |
---|---|
Application | The shell side of the heat exchanger is all stainless steel (SUS304) so oil and a wide variety of other fluids can be used. |
Features |
・ALL stainless steel model and low priced model with cast iron chennels is available. ・High flexbility of installation by selectable flow direction and adjustable U-bolt stand. ・Bare cooling tube appropriate to fluid contamination at shell side is used. |
⇈ You can select heat exchanger simply by the catalog.
Item | Standard Spec. | Option |
---|---|---|
Type | Fixed tube sheet | |
Maximum working pressure | Shell side: 1.0MPa Tube side: 1.0MPa |
|
Corresponding fluid | Shell side: Fresh water Tube side: Fresh water |
Non-corrosive fluids for SUS 304 |
Cooling tube | Material quality: SUS304 | |
Heat transfer area | 0.15-3.3㎡ | |
Tie-in | Shell side: Rc threaded type Tube side: Rc threaded type |
Code | Heat transfer area (㎡) | Shell dia |
103 | 0.15 |
φ76.3 (65A) |
106 | 0.3 | |
210 |
0.5 |
φ114.3 (100A) |
214 | 0.7 | |
220 | 1 | |
226 | 1.3 | |
330 | 1.5 |
φ139.8 (125A) |
338 | 1.9 | |
352 | 2.6 | |
366 | 3.3 |
Code | Oil quantity classification *1 |
0 | Large |
1 | Normal |
2 | Small |
Code | Material |
- | FC |
SCS | SUS |
Oil quantity classification
*1 Flow rate classification is basically as follows.
・large oil rate is model with small number
・small oil rate is model with large number
Model example:TCW-210-1
+81-3-6912-9922+81-3-6912-9922
Excluding Saturdays, Sundays and Holidays